Nokia 5800 battery terminal jumpers solution

5800 battery terminal way if prints damage jumpers.if battery terminal is damage in nokia 5800 then you can change it with new one some times prints are also damage then in that case this diagram will help you to solve this issue.


three battery terminal pins are shown with different colors so that can be found easily so make these jumpers as shown in diagram and power problem will be solve in Nokia 5800.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia Asha 201 Ringer Speaker Problem Solution Ways Jumpers

If the ring tone problem in Nokia Asha 201 SOUND quality is too low or poor voice quality in Ringer Nokia Asha 201 you can solve this problem easily with this schedule that is posted with this first step post.


in ringer to checked, so if it shows little or poor voice continuity put this ring as it does not show continuity ringer does not work and changing damage.after ringer ok you might not vote, these two main points ring is connected to the board control chart can be found in these two prints in red and blue lines on the screen lines.both two different paths.you should also check these links with the meter and if one of them is broken or damaged, you can easily can jumper, as defined in diagram.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia Asha 201 Keypad Not Working Ic Jumper Problem Solution

In Nokia asha 200 keypad problem can be due to rust carbon or water damage in this case keypad ic can be damage or keypad track can be missed from any point1 keypad problem can be due to rust carbon or water damage in this case keypad ic can be damage or keypad track can be missed from any point. for solving keypad problem in In Nokia asha 200 keypad problem can be due to rust carbon or water damage in this case keypad ic can be damage or keypad track can be missed from any point1 you can see diagram bellow.

In above diagram there are two main dial ic these are used for keypad functions and these are controlling keypad options. In upcoming days I will add a post about keypad track of In Nokia asha 200 keypad problem can be due to rust carbon or water damage in this case keypad ic can be damage or keypad track can be missed from any point1 that will also help you to see that which keys are linked with each other.

For this post you only can clean the board ic and keypad if there is some rust or carbon. you can resold these two parts and can replace these two ic for keypad problem in In Nokia asha 200 keypad problem can be due to rust carbon or water damage in this case keypad ic can be damage or keypad track can be missed from any point1.

For more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams. Some related post are also given bellow you can read them also for more information about cell phone.

Read More

NOKIA 5233 Not Charging solution no response problem solution

if we plug in charger into Nokia 5233 charging jack and it shows not charging instead of saving charging.it can be fault of charging jack or may be due to some parts.some time it can be cause of charger.so in first step replace charger and if problem will not solve then dis assemble mobile phone.

check whole board for rust carbon or water damage clean mother board and apply hot air so that it can be dry complete.positive link is shown with red line and green is to define ground.ground can be jumper with any ground point while in positive path you can check all parts and links if any link is not working apply jumper and if it is needed then replace parts those are missing or damage.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Camera Standby Not working Problem Solution Jumper Ways

Nokia C2-02 Camera Problem, Nokia C2-02 Camera Standby Mode can be cause of water damage or breakage. To solve this problem in the mobile phone you can follow a few steps that i am going to describe in this post.

In first step restore factory setting in Nokia C2-02. Then make a full flash (software firmware) installation. And the third step is to check hardware diagnostic. After dis assembly of phone check the whole mother board carefully.If there is some rust or carbon on board then clean it with electronics cleaner and apply some heat with hot air. So that the mother board can be dry.
If mother board can not be full dry it can create carbon in future so keep in mind it should be dry.Do not apply much heat as it can harm your skin and mother board of cell phone.
In above diagram as you can see there are different color lines. These lines are indicating tracks that are used in camera function so check these paths and apply jumpers as shown in above diagram.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 100 Dead and Not switch On with Battery

If you have a Nokia 100 Dead problem and it can not be switch on power on with battery but can be on with dc power supply then you can try this solution. look at the diagram given bellow in this post.

You can see two red box in picture one of them is showing text remove so remove that resistance and other one you have to replace. check battery terminals also because in some cases it can be water damage or carbon on it.

So if you see some carbon or rust then clean the board and battery terminals with electronics cleaner and dry for a few mints with hot air or under electrical bulb.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 103 Battery Terminal Points Damage Ways Problem Solution

Nokia 103 Battery Terminal Points Damage Ways Problem Solution if in Nokia 103 during changing battery terminal points you have loss battery points then you can solve this problem with this diagram bellow posted in this post.


there are three different color lines in this post shows that how you can make jumpers so check these links with meter and if any of them is broken make these jumpers with insulation wire.this diagram can help you in case Nokia 103 is dead you can check these links so that battery current can pass through right ways and can be set on off.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia X2 Ringer Problem Jumper Ways Solutions

It can be fault of ringer and its tracks.If you have ringer problem in Nokia X2-00 Classic you can not hear media music and videos voice. Ringtones not work proper and you will not be able to make a Loud speaker call in it.

To solve ringer problem in Nokia X2-00 Classic you can follow a few simple steps that are given in above diagram.In above repairing diagram you can see two different color lines these line are tracking ad paths of ringer function in Nokia X2-00 Classic.

So in first step you can replace ringer and if replacement of ringer will not work you can check all these tracks that are given in above diagram.

So if any of them is missing you can apply that jumpers and if any parts out of them are broken or damage you can replace them.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-07 Ringer Problem Solution Jumper Ways

Problem:
Nokia C2-07 ringer HF is not working, Nokia C2-07 Ringer Speaker is not working, Nokia C2-07 can not play music. We can not here voice during loud speaker in Nokia c2-07.
Tools:-
Nokia key T4 and T5
Hot air.
Soldering Iron.
Electronics Cleaner.
Nokia C2-07 Ringer,

Diagnostic & Solutions:-
If Nokia C2-07 is not able to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.

it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-07 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.

So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-07 so apply these jumper to solve ringer problem in Nokia C2-07

Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Ringer Problem Solution Jumper Ways

Problem:
Nokia C2-02 ringer HF is not working, Nokia C2-02 Ringer Speaker is not working, Nokia C2-02 can not play music. We can not here voice during loud speaker in nokia c2-02.
Tools:-
Nokia key T4 and T5
Hot air.
Solding Iron.
Electronics Cleaner.
Nokia C2-02 Ringer,

Diagnostic & Solutions:-
If Nokia C2-02 is not able to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.

it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-02 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.

So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-02 so apply these jumper to solve ringer problem in Nokia C2-02

Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Mic Problem Solution Jumper Ways Microphone

Problem:-
Nokia C2-02 Mic not working, Microphone is not working in Nokia C2-02, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-02

Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Soldering iron.

Diagnostics & Solutions:-
Before Disassemble of Nokia C2-02 make sure that mic whole in Casing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with soldering iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in Nokia C2-02

Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don't apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-06 Mic Problem Solution Jumper Ways Microphone

Problem:-
Nokia C2-06 Mic not working, Microphone is not working in Nokia C2-06, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-06

Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Soldering iron.

Diagnostics & Solutions:-
Before Disassemble of Nokia C2-06 make sure that mic whole in Casing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with soldering iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in Nokia C2-06

Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don't apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Charger Not Supported Problem Solution Ways

Plug in Charging pin into charging jack of Nokia C2-02 and if it shows an indication message Charger Not Supported it can be due to these few parts that are given bellow in diagram.So after disassemble of Nokia C2-02 clean these parts and area with electronics cleaner.

Apply hot air and make it dry.Resold these parts indicated with red lines in above diagram to solve Charger Not Supported in Nokia C2-02
You can take these parts from other models of Nokia also to solve charging problem in Nokia C2-02

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-08 MMC Memory Card Problem Solution Ways

f Nokia C2-08 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-08.


The above diagram have a red line to show you which parts are used in Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-08.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-08 Charger Not Supported Problem Solution Ways

Plug in Charging pin into charging jack of Nokia C2-08 and if it shows an indication message Charger Not Supported it can be due to these few parts that are given bellow in diagram.So after disassemble of Nokia C2-08 clean these parts and area with electronics cleaner.

Apply hot air and make it dry.Resold these parts indicated with red lines in above diagram to solve Charger Not Supported in Nokia C2-08
You can take these parts from other models of Nokia also to solve charging problem in Nokia C2-08

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-07 Full PCB Diagram Mother Board Layout

 Nokia C2-07 Full PCB cellphone Diagram Mother Board Layout.
Here is the cellphone diagram of Nokia C2-07 PCB.so i will add some more cellphone diagram in high resolution so that you can add some more repairing trick for

High Resolution

Download High Resolution Diagram of Nokia C2-07

Nokia C2-07 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible "REPAIRING MADE EASY".

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Full PCB Diagram Mother Board Layout

 Nokia C2-02 Full PCB cellphone Diagram Mother Board Layout.
Here is the cellphone diagram of Nokia C2-02 PCB.so i will add some more cellphone diagram in high resolution so that you can add some more repairing trick for

High Resolution

Download High Resolution Diagram of Nokia C2-02

Nokia C2-02 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible "REPAIRING MADE EASY".

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-08 Not Charging Problem jumpers Ways Solutions

Problem:-
1-Nokia C2-08 not charging problem.
2-Nokia C2-08 Do not show charging.
Tools:-
1-Hot Air is required.
2-Soldering iron is required.
3-Screw driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-08 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.

Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassemble Nokia C2-08 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-Check all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-07 Not Charging Problem jumpers Ways Solutions

Problem:-
1-Nokia C2-07 not charging problem.
2-Nokia C2-07 Do not show charging.
Tools:-
1-Hot Air is required.
2-Soldering iron is required.
3-Screw driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-07 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.

Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassemble Nokia C2-07 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-Check all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-06 Not Charging Problem jumpers Ways Solutions

Problem:-
1-Nokia C2-06 not charging problem.
2-Nokia C2-06 Do not show charging.
Tools:-
1-Hot Air is required.
2-Soldering iron is required.
3-Screw driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-06 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.

Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassemble Nokia C2-06 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-Check all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Not Charging Problem jumpers Ways Solutions

Problem:-
1-Nokia C2-02 not charging problem.
2-Nokia C2-02 Do not show charging.
Tools:-
1-Hot Air is required.
2-Soldering iron is required.
3-Screw driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-02 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.

Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassemble Nokia C2-02 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-Check all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia Asha 201 MIC Jumper Ways Problem Solution

this is diagram to show you that how to jumper mic in Nokia Asha 201.as in diagram we can see there are four prints in mic.one of these points is ground.and the front prints of it are for next point.

between these two point add a 1k resistance.so with this diagram you can use only two point and mic will work well and ok.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia Asha 201 Insert Sim Problem Solution Jumpers Ways

Nokia Asha 201 have two stand by sims in it.if you are facing insert sim problem in Asha 201 for both sims or a single sim is not working here is the diagram that will help you to solve this problem in Asha 201.

In diagram you can see there are multiple lines with different colors that are indicating different sim points and there path to different parts you can check these path and if any of them is broken then you can make jumpers to them. if any part is not at the same place and have broken due to water damage or something else then you can see some points can also be scratched. So scratch them slightly and make jumper at that point.

Big round points on lines shows that you can make jumper on that point.

a big thanks to Mr Tuseef Ahmed for sending this diagram to us.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia Asha 201 Camera Problem Solution Jumper Ways

if Nokia Asha 200 camera is not working we can not take pictures and make video from Nokia Asha 200.for making video or taking snaps it is to much necessary that we solve Nokia Asha 200 camera problem so that it can be used for taking snaps and photos.


to solve Nokia Asha 200 camera switch button we can follow steps as given in above diagram.first remove camera from jack and check its points may they have some carbon or water damage so clean these point with electronics cleaner and apply some hot air to dry board.
then check all these track as shown with different colors in above diagram.all these colors define path and track and parts which are used in camera function.so if any link is broken apply jumpers and parts are missing or  damage replace them to solve Nokia Asha 200 camera not working problem solution.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

iPhone Camera Not Working Problem Solution

Failure of the iPhone's camera phone owner denies the possibility to do a photo and use some applications (such as a bar code scanner or meter pulse). In itself, this problem is not fatal, but quite unpleasant: still limited to the functional unit.

Why is not working in iPhone camera? What causes this error?

• The most common problems with the camera due to its breakdown. This component of the unit is quite fragile and can be damaged by the slightest shock, not to mention the fall of the phone.

Repair a broken camera too expensive: much cheaper to replace it with a new - original and fully compatible with the specific model of iPhone.

At the service center, this procedure takes no more than 40-50 minutes.

• The camera may fail if the terminals were oxidative reactions due to ingestion phone liquid.

As in the previous case, the item can not be repaired and replaced intact. You may need cleaning internal telephone from oxidation.

• If the camera has no visible damage, but still does not work, perhaps failed her tail. Most often it is because of the same reasons: moisture and negative mechanical impact.

As the train and the camera is a single module, changing both parts.

• Camera iPhone may not work due to violations of the integrity of the tracks on the PCB or any other components of this detail. Determine if this is the real reason for the eye can not - will need thorough diagnosis phone. After this procedure, the master will announce further order of activities, as well as mark the approximate dates and exact cost of repair.

Read More

Nokia X2-02 Mic Problem Solution Jumper Ways Microphone

Problem:-
Nokia X2-02 Mic not working, Microphone is not working in Nokia X2-02, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia X2-02

Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Soldering iron.

Diagnostics & Solutions:-
Before Disassemble of Nokia X2-02 make sure that mic whole in Casing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with soldering iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in Nokia X2-02

Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don't apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it. 

Read More

Nokia C2-02 Insert sim ways problem solution jumpers

Problem:-
Nokia C2-02 insert sim problem, Sim is not working in Nokia C2-02, Sim is not Valid, Single Sim is not working in Nokia C2-02
Tools:-
Nokia T4 and T5 key, Electronic meter, Electronics Cleaner, Hot Air, Soldering Iron, Jumper Wire.

Diagnostic and Solutions.
if sim is not working in Nokia C2-02 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-02.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-02 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-02
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.

Warnings:
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Soldering iron it might can damage prints also.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia Asha 201 Charging Problem Solution Jumpers Ways

In Nokia asha 201 if it is not charging OK and you have not charging problem in Nokia asha 201 then you can solve this problem with help of diagram bellow. in this diagram all charging links are identified so that you can understand which parts are used in charging function in Nokia asha 201.

So one print is ground it is identified in diagram with blue color and red cooler is a positive print and you can check all track with meter and if any of them is broken you can apply jumper as defined in repairing diagram.mostly if we plug in charger and it does not show any thing it can be fault of charging base or may be fault of broken link. so check charging base also.
If it shows not charging indication or a message charger not supported then it can be fault of charging ic or may be due to 47k resistance. About these problems I will post in upcoming days.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 MMC Memory Card Problem Solution Ways

if Nokia C2-02 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-02.


The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-02.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-08 Mic Problem Solution Jumper Ways Microphone

Problem:-
Nokia C2-08 Mic not working, Microphone is not working in Nokia C2-08, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-08

Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Soldering iron.

Diagnostics & Solutions:-
Before Disassemble of Nokia C2-08 make sure that mic whole in Casing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with soldering iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in Nokia C2-08

Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don't apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-08 LCD Display Problem Solution Ways Jumpers

Problem:-
Nokia C2-08 Blank LCD Display, Nokia C2-08 White LCD Display, Nokia C2-08 LCD Jack Damage Prints Missing.
Tools:-
To solve LCD display problem in Nokia C2-08 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
LCD panel for Nokia C2-08
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
LCD Jack if we have to replace it.


Diagnostics & Solution:
After disassemble of Nokia C2-08 remove LCD and check LCD jack and its near by area for rust or water damages.
If here is some carbon on parts or at LCD jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with LCD and if it is still blank replace with new one.
It might be possible that LCD jack pins are missing or not getting connected with LCD so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.

Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check LCD jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove LCD jack prints might be damage.
When you replace LCD make sure LCD strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 5233 Ringer not working problem solution tested

Nokia 5233 ringer problem can be solve with a few steps that are given in diagram bellow so look at diagram bellow to solve love ringer voice, no ringer tones, no ringer working problems in Nokia 5233.in diagram there are two colors blue and red both colors are defining path of circuit in mobile phone.

Check ringer and if ringer do not show continuity or a good value with meter then change ringer with new one. Check points on board where ringer have to attach after put in casing housing.
Then check all these paths as shown in diagram above and if any of them is broken or missing components then apply jumpers as described above. Small circle shows positions where we are able to make jumpers. in these place we can apply jumpers to solve ringer problem in Nokia 5233.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 103 insert sim problem solution ways track jumper

as in my previous post i have posted many insert Sim solutions today i am posting a new trick about insert sim problem in Nokia 103.so this will help you to solve insert sim problem in Nokia 103.


all path is shown with different colors check them with meter if any link is broken make jumpers and if needed remove sim ic and short it as shown in diagram.simply remove sim ic and make jumper as given.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia 103 mic problem solution ways jumpers microphone tips and tricks

Nokia 103 mic problem solution ways jumpers microphone tips and tricks are posted in this post.if you are facing mic not working problem or low voice mic problem in Nokia 103 then see this diagram posted bellow and check these links that are shown with red and blue color lines.


make these jumpers if any of them is broken and also check mic volt some time all links are ok but mic volt are not same as the should be in that case change Nokia 103 mic.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia 103 Not charging problem ways jumper solution track

Nokia 103 not charging problem can be solved with this useful diagram as given bellow.check all that track with meter and if any value is broken make jumper as shown in it.


you may have to change these parts if problem can not be solve with only jumper. You should also remove test mode double Resistance if charging problem can not be solved with whole this diagram.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia asha 201 Battery Terminal Points Damage Ways Problem Solution

Nokia Asha 201 Battery Terminal Points Damage Ways Problem Solution if in Nokia Asha 201 during changing battery terminal points you have loss battery points then you can solve this problem with this diagram bellow posted in this post.

there are three different color lines in this post shows that how you can make jumpers so check these links with meter and if any of them is broken make these jumpers with insulation wire.this diagram can help you in case Nokia Asha 201 is dead you can check these links so that battery current can pass through right ways and can be set on off.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia 103 led lcd display light solution jumpers ways

Nokia 103 led LCD display light solution jumpers ways.in this diagram all links and ways are defined with different colors so that can be identified easily so check all these link with electronic meter and if any or them is broken make these jumpers to solve light led display problem in Nokia 103.


for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia Asha 201 MMC Memory Card Problem Solution Ways Jumpers

If you are facing mmc problem in Nokia asha 201 then here is a helpful and useful diagram for you to solve these problems. Look at diagram bellow and in it you can see an ic is identified with red box. This part is used for memory card functions in Nokia asha 201.

Check all the board carefully and if there is some rust carbon or water damage then clean it with electronics cleaner and dry it with hot air or put it under electrical bulb for a few mint so that can be dry. not apply to much heat because and can be harm for your mobile circuit.

Then resold this ic with hot air and if not solve the problem then change this.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

BLACKBERRY Security Factory Setting Codes

BLACKBERRY Security Factory Setting Codes
BLACKBERRY SECRET CODES:
To display your signal strength in decibels instead of bars: hold "alt" and press "N", "M", "L", "L"(repeat to reverse the effect)
To check the data in your address book for inconsistency: in the address book hold "Alt" and press "V", "A", "L", "D"
To re-built the data structure in the address book: In the address book hold "Alt" and press "R", "B", "L", "D"
To display the source code of web page: In the browser hold "Alt" and press "R", "B", "V", "S"
For technical information's about device: hold "Alt" and (left) "shift" then press "H"
IMEI code: * # 06 #
Perform soft-reset of your device: press and hold "Alt" then press and hold (left) "shift', then press and hold "del"
To display the event logs of all the system-level events that occurs on your device: hold "Alt" and press "L", "G", "L", " L"
(c)
Mobile secrets and tricks are the easy and short ways to perform the specific tasks and programs of the device. Here is some mobile phone tricks mentioned below:
NOKIA: (secrets for all model types)
Check the IMEI: * # 06 #
Check the software version: * # 8110 #
Sim clock stop: * # 746025625 #
Warranty menu: * # 92702689 #
Display the month and year of the manufacturer: 6232 (OK)
Displays the date of the last repairment: 7332 (OK)
Displays the date when the phone was purchased: 7832 (OK)
Displays the serial number: 9268 (OK)
Set the purchasing date: 37832 (OK)
Transfers all phone numbers, pictures, sounds from one phone to another: 87267 (OK)
To put your phone into silent mode temporarily, press the menu button then #
To turn ON the display light the quickly press and release the power button. They will stay on as long as button is kept press.
To delete SMS quickly, instead of pressing the option, erase to delete the message, just press C.
SAMSUNG:
Show IMEI number: * # 06 #
Show software version: * # 9999 #
Show serial parameter: * # 0001 #
Activate the smiley when charging: * # 9125 #
Battery status: * # 9998 * 228 #
Program status: * # 9998 * 246 #
Change alarm buzzer frequency: * # 9998 * 289 #
debug screens: * # 9998 * 324 #
Watchdog: * # 9998 * 364 #
Trace watchdog: * # 9998 * 427 #
Change LCD contrast: * # 9998 * 523 #
Jig detect: * # 9998 * 544 #
Memory status: * # 9998 * 636 #
SIM file size: * # 9998 * 746 #
SIM service table: * # 9998 * 778 # 

Read More

Nokia Asha 201 On Off Power Button Print Damage Problem

if you are facing power problem in Nokia Asha 201 and have on off button problem in Nokia Asha 201.if power button is not working and charging properly then it means that here is a power problem due to only power button.

this diagram can help you in case if power on off button print is damage also.make this jumper as shown in diagram in red line color.and also check this ic which is inline with red line.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia Asha 303 Ringer Problem Solution jumpers

Nokia Asha 303 ringer problem can be solve with a few steps that are given in diagram bellow so look at diagram bellow to solve love ringer voice, no ringer tones, no ringer working problems in Nokia asha 303.in diagram there are two colors blue and red both colors are defining path of circuit in mobile phone.

Check ringer and if ringer do not show continuity or a good value with meter then change ringer with new one. Check points on board where ringer have to attach after put in casing housing.
Then check all these paths as shown in diagram above and if any of them is broken or missing components then apply jumpers as described above. Small circle shows positions where we are able to make jumpers. in these place we can apply jumpers to solve ringer problem in Nokia asha 303.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia Asha 303 LCD light Problem Jumpers Solution

In Nokia Asha 303 LCD light problem display led light problem, display light not working can be solve in a few easy steps that are posted in this post. So read it carefully and see diagram bellow to solve light problem in Nokia Asha 303 LCD display

Check LCD jack and LCD jack on board clean them with electronics cleaner and leave it to dry under electrical bulb or apply some hot air so that it can be dry. Check these two links shown in diagram with different colors and if any of them is broken then please make jumpers to solve light problem in Nokia Asha 303.

For more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams. Some related post are also given bellow you can read them also for more information about cell phone.

Read More

Nokia Asha 303 Touch Screen Panel Problem Jumpers Solution

If you are facing touch screen problem in Nokia asha 303 then this diagram below will help you to solve touchscreen problem in it.look at diagram bellow and in it you can find different color’s lines.

These multi color lines are defining path and track of touch screen panel in Nokia asha 303.in diagram a zoom image is also given so that you can understand which parts components are used in touch function.

So check these parts with electronics meter and if any link of them is broken apply that jumper to solve touch screen not working problem in Nokia asha 303.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 3600 Power Button On Off Switch Not Working Problem

if you have a Nokia 3600 dead they may can have a power switch on off problem so please in first step plug in a charger and if Nokia 3600 is charging proper and well but not getting on it means the main problem can be power switch on off fault.

so for this you have to change power switch button on off button in Nokia 3600 if prints are also damage in Nokia 3600 for on off button then here is a full path and track for power switch button in diagram that is attached with this post so check all this path and track for power switch on off button in Nokia 3600 and if any of these links broken than make these jumpers as shown in diagram with red line while blue color is indicated for ground print.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia Asha 303 Ringer Problem Solution jumpers

Nokia Asha 303 ringer problem can be solve with a few steps that are given in diagram bellow so look at diagram bellow to solve love ringer voice, no ringer tones, no ringer working problems in Nokia asha 303.in diagram there are two colors blue and red both colors are defining path of circuit in mobile phone.

Check ringer and if ringer do not show continuity or a good value with meter then change ringer with new one. Check points on board where ringer have to attach after put in casing housing.
Then check all these paths as shown in diagram above and if any of them is broken or missing components then apply jumpers as described above. Small circle shows positions where we are able to make jumpers. in these place we can apply jumpers to solve ringer problem in Nokia asha 303.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia Asha 303 LCD light Problem Jumpers Solution

In Nokia Asha 303 LCD light problem display led light problem, display light not working can be solve in a few easy steps that are posted in this post. So read it carefully and see diagram bellow to solve light problem in Nokia Asha 303 LCD display

Check LCD jack and LCD jack on board clean them with electronics cleaner and leave it to dry under electrical bulb or apply some hot air so that it can be dry. Check these two links shown in diagram with different colors and if any of them is broken then please make jumpers to solve light problem in Nokia Asha 303.

For more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams. Some related post are also given bellow you can read them also for more information about cell phone.

Read More

Nokia 3600 Power Button On Off Switch Not Working Problem

if you have a Nokia 3600 dead they may can have a power switch on off problem so please in first step plug in a charger and if Nokia 3600 is charging proper and well but not getting on it means the main problem can be power switch on off fault.

so for this you have to change power switch button on off button in Nokia 3600 if prints are also damge in Nokia 3600 for on off button then here is a full path and track for power switch button in diagram that is attached with this post so check all this path and track for power switch on off button in Nokia 3600 and if any of these links broken than make these jumpers as shown in diagram with red line while blue color is indicated for ground print.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia Asha 303 Touch Screen Panel Problem Jumpers Solution

If you are facing touch screen problem in Nokia asha 303 then this diagram bellow will help you to solve touchscreen problem in it.look at diagram bellow and in it you can find different color’s lines.

These multi color lines are defining path and track of touch screen panel in Nokia asha 303.in diagram a zoom image is also given so that you can understand which parts components are used in touch function.

So check these parts with electronics meter and if any link of them is broken apply that jumper to solve touch screen not working problem in Nokia asha 303.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia Asha 201 On Off Power Button Print Damage Problem

if you are facing power problem in Nokia Asha 201 and have on off button problem in Nokia Asha 201.if power button is not working and charging properly then it means that here is a power problem due to only power button.

this diagram can help you in case if power on off button print is damage also.make this jumper as shown in diagram in red line color.and also check this ic which is inline with red line.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Read More

Nokia C1-00 Light without Ic Display Keypad Led jumper tested

Nokia C1-00 Light without Ic Display Keypad Led jumper tested.if you are facing light problem in Nokia C1-00 then here is a simple diagram that i am going to post today.in past i have posted some light solutions but it is a new one and can solve led keypad and LCD lights without light ic.


in above diagram you can see red and pink points so remove light ic coil and three leg resistance and make these jumpers as you can see in diagram.this will help you to solve LCD keypad display light problem in Nokia C1-00 without light ic. These jumpers will help for solving light problem in Nokia 1662 also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia X201 Insert Sim Problem Solution Jumpers

To solve Nokia x201 insert sim problem, Sim not working, Sim Missing All sim related problems can be solve with diagram bellow so look at diagram bellow and follow simple steps given in it.

In above diagram there are a few different colors and all these colors are indicating circuit path of Nokia x201 for insert sim problem solution. So check all these prints and parts with meter and if any of them is missing apply jumper and solve insert sim issue in Nokia x201.

For more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams. Some related post are also given bellow you can read them also for more information about cell phone.

Read More