Nokia Asha 202 USB Not Charging Problem Solution Jumper Ways

If Nokia asha 202 is not charging with USB or USB can not be detected it can be cause of water damages. Carbon in USB base. Broken or damage parts and may be due to burn components.To solve USB not charging in Nokia asha 202 you can read this post which also contains a USB not charging repairing diagram for Nokia asha 202.

In above diagram you can see Red, Blue & Black lines these are used in USB charging and USB data functions. Check USB charging jack if it have some carbon or rust then clean it with CTC and apply heat to make it Dry.
If USB charging jack of Nokia asha 202 is damage or Replace it. If a few pins are missing then check all these tracks that are given in above Nokia asha 202 USB not charging diagram. If any print out of these is missing apply jumpers.

Check all these parts and if any of them is broken or damage apply jumpers. If jumpers can not solve USB data & charging problem of Nokia asha 202 then replace these parts.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 LCD Display Problem Solution Ways Jumpers

Problem:-
Nokia C2-02 Blank LCD Display, Nokia C2-02 White LCD Display, Nokia C2-02 LCD Jack Damage Prints Missing.
Tools:-
To solve LCD display problem in Nokia C2-02 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
LCD panel for Nokia C2-02
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
LCD Jack if we have to replace it.


Diagnostics & Solution:
After disassemble of Nokia C2-02 remove LCD and check LCD jack and its near by area for rust or water damages.
If here is some carbon on parts or at LCD jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with LCD and if it is still blank replace with new one.
It might be possible that LCD jack pins are missing or not getting connected with LCD so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.

Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check LCD jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove LCD jack prints might be damage.
When you replace LCD make sure LCD strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Camera Standby Not working Problem Solution Jumper Ways

Nokia C2-02 Camera Problem, Nokia C2-02 Camera Standby Mode can be cause of water damage or breakage. To solve this problem in the mobile phone you can follow a few steps that i am going to describe in this post.

In first step restore factory setting in Nokia C2-02. Then make a full flash (software firmware) installation. And the third step is to check hardware diagnostic. After dis assembly of phone check the whole mother board carefully.If there is some rust or carbon on board then clean it with electronics cleaner and apply some heat with hot air. So that the mother board can be dry.
If mother board can not be full dry it can create carbon in future so keep in mind it should be dry.Do not apply much heat as it can harm your skin and mother board of cell phone.
In above diagram as you can see there are different color lines. These lines are indicating tracks that are used in camera function so check these paths and apply jumpers as shown in above diagram.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Ringer Problem Solution Jumper Ways

Problem:
Nokia C2-02 ringer HF is not working, Nokia C2-02 Ringer Speaker is not working, Nokia C2-02 can not play music. We can not here voice during loud speaker in nokia c2-02.
Tools:-
Nokia key T4 and T5
Hot air.
Solding Iron.
Electronics Cleaner.
Nokia C2-02 Ringer,

Diagnostic & Solutions:-
If Nokia C2-02 is not able to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.

it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-02 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.

So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-02 so apply these jumper to solve ringer problem in Nokia C2-02

Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Mic Problem Solution Jumper Ways Microphone

Problem:-
Nokia C2-02 Mic not working, Microphone is not working in Nokia C2-02, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-02

Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Soldering iron.

Diagnostics & Solutions:-
Before Disassemble of Nokia C2-02 make sure that mic whole in Casing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with soldering iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in Nokia C2-02

Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don't apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Charger Not Supported Problem Solution Ways

Plug in Charging pin into charging jack of Nokia C2-02 and if it shows an indication message Charger Not Supported it can be due to these few parts that are given bellow in diagram.So after disassemble of Nokia C2-02 clean these parts and area with electronics cleaner.

Apply hot air and make it dry.Resold these parts indicated with red lines in above diagram to solve Charger Not Supported in Nokia C2-02
You can take these parts from other models of Nokia also to solve charging problem in Nokia C2-02

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Full PCB Diagram Mother Board Layout

 Nokia C2-02 Full PCB cellphone Diagram Mother Board Layout.
Here is the cellphone diagram of Nokia C2-02 PCB.so i will add some more cellphone diagram in high resolution so that you can add some more repairing trick for

High Resolution

Download High Resolution Diagram of Nokia C2-02

Nokia C2-02 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible "REPAIRING MADE EASY".

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Not Charging Problem jumpers Ways Solutions

Problem:-
1-Nokia C2-02 not charging problem.
2-Nokia C2-02 Do not show charging.
Tools:-
1-Hot Air is required.
2-Soldering iron is required.
3-Screw driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-02 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.

Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassemble Nokia C2-02 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-Check all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 Insert sim ways problem solution jumpers

Problem:-
Nokia C2-02 insert sim problem, Sim is not working in Nokia C2-02, Sim is not Valid, Single Sim is not working in Nokia C2-02
Tools:-
Nokia T4 and T5 key, Electronic meter, Electronics Cleaner, Hot Air, Soldering Iron, Jumper Wire.

Diagnostic and Solutions.
if sim is not working in Nokia C2-02 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-02.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-02 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-02
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.

Warnings:
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Soldering iron it might can damage prints also.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia C2-02 MMC Memory Card Problem Solution Ways

if Nokia C2-02 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-02.


The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-02.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More