Nokia X2 Mic problem solution jumper ways

If Mic is not working in Nokia X2-00 we can not make a voice call and we can not record sound in it. To solve microphone problem you can read all this post and follow these steps that are given in diagram bellow.

So look at above diagram and after dis assembly of Nokia X2-00 replace old mic with new one.If replacement of mic did not solve the problem in Nokia X2-00.Try to check these parts that are inline with red and blue colors.

If any path out of these is missing you can apply jumpers as shown in repairing diagram.

In mic repairing diagram some small circles indicate that you can apply jumpers on these points if parts are missing or damage. And in broken links you can also apply jumpers on same places as given in it.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia x2 handsfree open problem jumpers solution

Nokia X2-00 handsfree problem, hand free singe, hand free open, can be solve with this diagram that I am going to post in this post bellow. look at the diagram and these two ic and there near about area if you find some rust water damage or carbon here you can clean the board and dry it.

Once it is cleaned resold these parts and if problem is not solve remove first ic and make jumpers as defined in diagram and replace 2nd part to solve hand free problem in Nokia X2-00.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams. some related post are also given bellow you can read them also for more information about cell phone.

Read More

Nokia X2 Battery Terminals Point Problem Jumper Ways

Nokia X2-00 Battery Terminal Points Damage Ways Problem Solution if in Nokia X2-00 during changing battery terminal points you have loss battery points then you can solve this problem with this diagram bellow posted in this post.


there are three different color lines in this post shows that how you can make jumpers so check these links with meter and if any of them is broken make these jumpers with insulation wire.this diagram can help you in case Nokia X2-00 is dead you can check these links so that battery current can pass through right ways and can be set on off.

Read More

Nokia X2 power button On Off switch not working ways jumpers

If Nokia X2-00 keypad is not working, A few keys of Nokia X2-00 are not working, Keypad Hang and double values when press a single time. Or improper keypad functions.

In all above cases and problem we can follow this post to solve Nokia X2-00 keypad problem in a few steps. If you press a single key and some other keys are also working it can be cause of water damages and rust, carbon. If you press keys and they do not reflect any process it can be problem of missing push button, missing components, burn parts.

After disassembling of Nokia X2-00 look at the motherboard for rust carbon or burned parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.

Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.

In above diagram you can see some different color lines all these different color inner and outer keys have same value according to the color scheme. So if a single key is not working we can check its inner and outer value with meter and apply jumper from the other one which is working in normal condition.

If all keys are not working we can re sold and re flow Keypad IC. If replacement can not solve the keypad problem in Nokia X2-00 we have to replace it with new one.

In this diagram you can also see Nokia X2-00 On Off Power Button ways and jumpers. 

Read More

Nokia X2 Insert Sim Problem Jumpers Solutions Ways

Nokia X2-00 Insert Sim No Sim repairing solution.Nokia X2-00. Insert Sim No Sim Mobile Repair diagram pictures Service Tips and Tricks.Make Jumpers as shown in diagram or replace the shown components .

Nokia X2-00 Insert Sim Card
Sim Card Problem
Sim Connector Ways
Insert Sim Card
Sim Card Problem
Sim Connector Ways

Once you have dis assemble the mobile phone look at the whole board vary carefully. If here is some rust carbon or water damages apply electronics cleaner and make it clean.Apply hot air to make it dry.

Keep in mind do not apply much heat because it can damage the mother board and can be harm for your skin. 

Read More

Nokia X2 Charger Not supported Problem solution

When you plugin the charge into Nokia X2 and it shows notification of Charger not Supported it can be the fault of 47k resistance.In this post I am going to post a diagram that will teach you how to solve charging not supported in Nokia X2 easily.

Replacement of battery can solve this problem.And if that can not solve charger not supported problem try same with an other charger.the next step is to disassemble the mobile phone.

In above diagram a resistance is in lined with red color and you can replace it to solve charging not supported in Nokia X2. You can take this resistance from any other board of Nokia X2.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia X2 Ringer Problem Jumper Ways Solutions

It can be fault of ringer and its tracks.If you have ringer problem in Nokia X2-00 Classic you can not hear media music and videos voice. Ringtones not work proper and you will not be able to make a Loud speaker call in it.

To solve ringer problem in Nokia X2-00 Classic you can follow a few simple steps that are given in above diagram.In above repairing diagram you can see two different color lines these line are tracking ad paths of ringer function in Nokia X2-00 Classic.

So in first step you can replace ringer and if replacement of ringer will not work you can check all these tracks that are given in above diagram.

So if any of them is missing you can apply that jumpers and if any parts out of them are broken or damage you can replace them.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia X2 MMC problem solution jumpers ways

if you have a mmc (memory card) problem in cellphone Nokia X2 insert memory card memory card is croupt.in this case in first step change memory card of cellphone and try it to insert correctly.if it is not working yet then open mobile and check mmc card jacket and its near about area.

if there is any water damages or rust clean these parts with electronics cleaner and leave it to dry for a few mints under electrical bulb.

if with only service problem can not be solved then you can replace ic that is inline with red line.you may can check also some more components near this area.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More