Nokia Nokia X2-05 On Off Power Button Jumper Ways Problem Solution

If Nokia X2-05 is not getting power On and it can make charging. It is 100% fault of on off button in it.because On Off button on keypad is not working so that it will not be able to power On.

After disassemble of Nokia X2-05 look at the motherboard for rust carbon or burned parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.

Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.

Nokia X2-05 power button On Off switch not working ways jumpers.Replace battery and check if mobile can not be switch On dis assemble the phone and check power switch button ways as given in above diagram.If any print out of these is missing apply jumpers to solve On Off Button problem in Nokia X2-05 .

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia Nokia X2-05 Mic problem solution Microphone not working

If mic is not working in Nokia X2-05. Microphone solution with jumpers, Low voice of Nokia X2-05 mic problem solution, Nokia X2-05 mic jumpers to make it solve.

If mic is not working or have a low voice it can be fault of mic and housing. Check Nokia X2-05 housing ( body ). All housing have a small whole at the point of mic. In some cases rust or dust cover this point and the voice can not reach proper to the mic point so make it clean if there is some dust on it.

After dis assembly of Nokia X2-05 look at the motherboard for rust carbon or burn parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.

Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.

Remove mic and check all these tracks that are provided in above diagram to solve mic problem in Nokia X2-05. In diagram two different color lines are given to identify all parts that are used to solve Nokia X2-05 mic problem with jumpers.

If some parts are missing or damage apply jumper on these points where small circles are pointing in Nokia mic repairing diagram above. 

Read More

Nokia X2-05 Speaker problem solution jumper ways

Nokia X2-05 speaker problem, Nokia X2-05 earpiece jumper ways, Nokia X2-05 mic is not working, Nokia X2-05 speaker jumpers, speaker is not working or low voice and noise.

If Nokia X2-05 speaker has low voice or noise it can be problem of speaker ear piece. If no voice in it that may can be cause of missing or damage parts. The noise can also be due to water damages in Nokia X2-05.

If speaker is not working or have a low voice it can be fault of speaker and housing. Check Nokia X2-05 housing ( body ). All housing have a small whole at the point of ear piece. In some cases rust or dust cover this point and the voice can not reach proper to the mic point so make it clean if there is some dust on it.

After disassemble of Nokia X2-05 look at the motherboard for rust carbon or burned parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.

Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.

Check all these tracks that are provided in above diagram to solve speaker problem in Nokia X2-05. In diagram two different color lines are given to identify all parts that are used to solve Nokia X2-05 speaker problem with jumpers.

If some parts are missing or damage apply jumper on these points where small circles are pointing in Nokia mic repairing diagram above. 

Read More

Nokia X2-05 Full PCB Diagram Mother Board Layout

 Nokia X2-05 Full PCB cellphone Diagram Mother Board Layout.
Here is the cellphone diagram of Nokia X2-05 PCB.so i will add some more cellphone diagram in high resolution so that you can add some more repairing trick for

High Resolution

Download High Resolution Diagram of Nokia X2-05

Nokia X2-05 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible "REPAIRING MADE EASY".

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia X2-05 Not Charging Problem Solution Jumper Ways

If we plug in charger into charging pin of Nokia X2-05 and show no notification on its screen. It will be cause of missing components or damages of charging pin, parts.

If notification on the screen of Nokia X2-05 will be about charger not supported it can be problem of charger not supported. And if notification displays about not charging. It can be the problem of water damages of may be due to in proper values of parts that are used in charging function of Nokia X2-05.

After disassemble of Nokia X2-05 look at the motherboard for rust carbon or burned parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.

Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.

In above diagram a red line bar is used to identify parts and ways that are used in solution of not charging in Nokia X2-05. Once you track these parts with meter apply jumpers if any of them is missing, damage or giving improper values. While the blue line is used for negative point of the charging base. 

Read More

Nokia X2-05 LCD Display Jumper Ways Problem Solution

Nokia X2-05 No display solution, Nokia X2-05 LCD problem solution, Nokia X2-05 LCD jumper ways, Nokia X2-05 white and blank display LCD. All these problems can be due to water damages. Carbon and burn parts of the smartphone.

After disassemble of Nokia X2-05 look at the motherboard for rust carbon or burned parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.

Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.

Remove old LCD and Check it with new one. In above diagram you can see some different color lines that are pointing to the parts which are used in Display function of Nokia X2-05.

Check all these parts with help of meter and apply jumpers as shown in above diagram to solve display problem in Nokia X2-05.

If you find some broken and missing components then apply jumper on points where small circles given in Nokia LCD problem solution. 

Read More

Nokia X2-05 Keypad Not Working Problem Solution Jumper Ways

If Nokia X2-05 keypad is not working, A few keys of Nokia X2-05 are not working, Keypad Hang and double values when press a single time. Or improper keypad functions.

In all above cases and problem we can follow this post to solve Nokia X2-05 keypad problem in a few steps. If you press a single key and some other keys are also working it can be cause of water damages and rust, carbon. If you press keys and they do not reflect any process it can be problem of missing push button, missing components, burn parts.

After dis assembly of Nokia X2-05 look at the motherboard for rust carbon or burn parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.

Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.

In above diagram you can see some different color lines all these different color inner and outer keys have same value according to the color scheme. So if a single key is not working we can check its inner and outer value with meter and apply jumper from the other one which is working in normal condition.

If all keys are not working we can re sold and re flow Keypad IC. If replacement can not solve the keypad problem in Nokia X2-05 we have to replace it with new one.

Read More