Nokia 100 LCD Blank Display Ways Jumpers Problem Solution

Nokia 100 LCD problem,white display problem,blank display and no light in LCD display of Nokia 100 can be solve with a few steps that are given in this post bellow is the diagram of Nokia 101 to solve LCD problem in it.

In diagram above you can see there are different color lines and these are identifying the path of LCD prints. LCD pins are counted in picture from left to right as 1,2…12 and these prints can be check with a multimeter if any of them is broken or any component is broken you can make jumper to the points that are shown in picture and a big round point shows here you can make jumper and these are test points for LCD display blank display problems.

As in LCD points numbers are shown same numbers are defined with parts so that you can easily find where you have to apply jumpers. . if any part is not at the same place and have broken due to water damage or something else then you can see some points can also be scratched. So scratch them slightly and make jumper at that point.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 100 Insert Sim Problem Solution Jumper Ways

Problem:-
Insert Sim Problem Jumpers,Sim not working, Invalid Sim.

Tools:-
Extra Sim Card for diagnostic.
Nokia Key T4 and T5 for disassemble.
Electronics Cleaner for cleaning carbon or water damages.
Hot air to dry the mother board.
Soldering Iron for applying jumpers.



Solution & Diagnostics:-

Try to solve the problem with inserting new Sim Card and check. If it is working problem can be solve with Sim Card changes only.
If the above step do not solve Insert Sim card problem then disassemble the mobile phone and look at the mother board.
If there is some rust or carbon then apply electronics cleaner and clean it.
Apply hot air to make it dry and test again.
Different color lines are given to indicate whole track and paths of insert sim card function in Nokia 100.
Check all points that are described in above diagram and if any track out of them is missing apply jumpers as shown in above diagram for solving insert sim card problem in Nokia 100.
You may have to change Sim ic that is near by the Sim jack.

Warnings & Tips:-
Do not apply much heat with hot air it can be harm for your skin.
Apply jumpers carefully so that it would not be short with other.
After cleaning with cleaner make it dry proper.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 100 Full PCB Diagram Mother Board Layout

 Nokia C2-03 Full PCB cellphone Diagram Mother Board Layout.
Here is the cellphone diagram of Nokia C2-03 PCB.so i will add some more cellphone diagram in high resolution so that you can add some more repairing trick for

High Resolution

Download High Resolution Diagram of Nokia 100

Nokia 100 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible "REPAIRING MADE EASY".
Thanks
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 100 Mic Problem Solution Jumper Ways

Problem:-
Mic Problem in Nokia 100, Mic is not working, Low Mic voice to destination,Microphone problem.

Tools:-
Nokia Key T4 and T5 for disassemble.
Electronics Cleaner for cleaning carbon or water damages.
Hot air to dry the mother board.
Soldering Iron for applying jumpers.

Solution & Diagnostics:-
Disassemble the mobile phone and look at the mother board.
If there is some rust or carbon then apply electronics cleaner and clean it.
Apply hot air to make it dry and test again.
Try with replacing mic with new one.
Check microphone point on the mother board and if value did not exist.
Different color lines are given to indicate whole track and paths of mic ( microphone ) function in Nokia 100.
Check all points that are described in above diagram and if any track out of them is missing apply jumpers as shown in above diagram for solving mic problem in Nokia 100.
You may have to change audio IC.

Warnings & Tips:-
Do not apply much heat with hot air it can be harm for your skin.
Apply jumpers carefully so that it would not be short with other.
After cleaning with cleaner make it dry proper.

Read More

Nokia 100 Ringer Problem Solution Jumper Ways

Problem:-
Ringer Problem, Ringer not working, Low Ringer Voice, Ringer is not Ringing in Nokia 100,

Tools:-
Extra Ringer for diagnostic.
Nokia Key T4 and T5 for disassemble.
Electronics Cleaner for cleaning carbon or water damages.
Hot air to dry the mother board.
Soldering Iron for applying jumpers.


Solution & Diagnostics:-
Disassemble the mobile phone and look at the mother board.
If there is some rust or carbon then apply electronics cleaner and clean it.
Apply hot air to make it dry and test again.
Try to solve the problem with inserting new Ringer and check. If it is working problem can be solve with Ringer changes only.
If the above step do not solve Ringer problem then test bellow steps.
Different color lines are given to indicate whole track and paths of ringer function in Nokia 100.
Check all points that are described in above diagram and if any track out of them is missing apply jumpers as shown in above diagram for solving ringer problem in Nokia 100.
You may have to change ringer IC that is near by the ringer points.

Warnings & Tips:-
Do not apply much heat with hot air it can be harm for your skin.
Apply jumpers carefully so that it would not be short with other.
After cleaning with cleaner make it dry proper.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 100 Not Charging Problem Solution Jumper Ways

Problem:-
Not Charging in Nokia 100, Charger Not Supported, Charger not working in Nokia 100, Fack charging.

Tools:-
Extra Charger for diagnostic.
Nokia Key T4 and T5 for disassemble.
Electronics Cleaner for cleaning carbon or water damages.
Hot air to dry the mother board.
Soldering Iron for applying jumpers.



Solution & Diagnostics:-
Plugin charger pin into charging jack of Nokia 100.
If charger is not working and you do not see any error at Nokia 100 screen it can be due to missing component or damaged.
If the error is Not charging or charger not supported it can be cause of charging ic and missing values.
Disassemble the mobile phone and look at the mother board.
Change charging pin and try again if above steps do not solve charging problem try bellow.
If there is some rust or carbon then apply electronics cleaner and clean it.
Apply hot air to make it dry and test again.
Different color lines are given to indicate whole track and paths of charging function in Nokia 100.
Check all points that are described in above diagram and if any track out of them is missing apply jumpers as shown in above diagram for solving charging problem in Nokia 100.
You may have to change charging IC.

Warnings & Tips:-
Do not apply much heat with hot air it can be harm for your skin.
Apply jumpers carefully so that it would not be short with other.
After cleaning with cleaner make it dry proper.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 100 Dead and Not switch On with Battery

If you have a Nokia 100 Dead problem and it can not be switch on power on with battery but can be on with dc power supply then you can try this solution. look at the diagram given bellow in this post.

You can see two red box in picture one of them is showing text remove so remove that resistance and other one you have to replace. check battery terminals also because in some cases it can be water damage or carbon on it.

So if you see some carbon or rust then clean the board and battery terminals with electronics cleaner and dry for a few mints with hot air or under electrical bulb.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More