Nokia 110 light problem solution with jumpers

problem is not LCD display light and keypad light also not getting on lighten.it is common fault of LCD pin 2 and 3.in diagram given bellow you can find these two lines with color so make jumper as shown in diagram.

on LCD prints strip can be scratched vary carefully and slightly so that it can be sold easily and then you can make jumper as i told above.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 110 light problem solution with jumpers

Nokia 110 light problem can be cause of water damage in it. Carbon or burn parts can also be the reason of light problem in Nokia 110.Due to light problem we can not see the display of Nokia 110.

To solve Nokia 110 light problem we can make these jumpers as given in above diagram to solve repairing LCD display light in Nokia 110. Keypad light problem, LCD light problem, display light solution in Nokia 110.
After dis assembly of Nokia 110 you have to check if there is some carbon or rust. Clean whole the mother board of Nokia 110 with electronic cleaner for water damages.Apply heat with hot air and keep in mind it should not be too much. Because it can be dangerous for your skin and can also damage the mother board of Nokia 110.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 110 Local Test Mode Problem Solution Jumper Solution

some time we get test mode local problem in our mobile display and in this case we can not use cell

phone keypad and other functions.if you have same problem then diagram bellow will help you to solve

this problem. In above diagram you can see a red line box to show the exact location of resistance

which is used in problem solution of test mode in Nokia 110.

Once phone has been disassembled you can clean whole mother board for rust or carbon.Leave it to dry

and apply hot air.Replace indicated resistance and also check components behind battery terminals.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 110 No Power On with Battery Problem Solution

Problem:-
1-Nokia 110 is not getting power on with battery.
2-Nokia 110 is dead and not getting power on with battery.
3-But it can be switch on with direct power supply of 4V.



Tools:-
To solve this problem you should have
1-Any electronics cleaner.
2-Hot Air Machine.
3-Soldering Iron.
4-And same mother board if a few components required.

Solution:-
1-Check Nokia 110 with new battery and try to switch on.
2-If it can not be power on with battery then check with Power Supply.
3-Disassemble Nokia 110 and look at mother board very carefully.
4-If there is some rust or carbon on board then clean it with electronics cleaner.
5-Apply hot air with Hot air gun. Here should not be much heat because it can harm you and Mobile

Phone.
6-Check Mobile phone with battery if it can be power on with it.
7-If not working with above process then change these parts as shown in above diagram.
Warnings:-
1-Do not apply to much heat it can be harm for your skin and mobile.
2-Do not apply to much cleaner it can be cause of rust or carbon if you do not make your phone dry.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More